Installs

Installation: 

• Step 1: Wash your hands with soap and water to ensure nothing will be transferred from your hands to the 3M adhesive that would interfere with the wrap adhering to your product. 

• Step 2: Using the provided alcohol swab, wipe down the entire surface of your product and allow it to completely dry. 

• Step 3: Remove the wrap’s backing to expose the adhesive. For best results, use a pair of flat-tip tweezers. 

• Step 4: Choose a starting point. We recommend selecting a straight edge or a cut-out as the best guide for proper alignment. 

• Step 5: Gently press the wrap into place working your way from one side to the other. The wrap can be easily lifted, adjusted and reapplied as needed, during the initial placement. 

 

• Step 6: Once you are happy with the wrap’s placement, firmly press down on the Cordura over your entire product. The 3M adhesive is pressure and time activated. After it is pressed down firmly, it takes approximately 24 hours to “cure”.